Version 1.0 and 1.1 users: There are significant interface changes 1.2. See the change history at the end if this file for details.
And now a word from the lawyers…
This software is a copyrighted work, it is not and never has been in the public domain. You may use this software to evaluate its usefulness if your evaluation is strictly for private and non-commercial use. You may give a copy of this software to another individual if you include the software's README file and all other related software materials. This software may not be sold, incorporated into other products, or in anyway commercially exploited without prior written consent of the author. If you want to continue using this software beyond your evaluation, please send $20.00 to the address listed below.
TWO BITS WORTH MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING THE SOFTWARE PACKAGE DESCRIBED BELOW, ITS MERCHANTABILITY, OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. YOU ASSUME THE ENTIRE RISK OF USING THE SOFTWARE, INCLUDING ANY LOSS OR DAMAGE OF DATA OR MATERIALS RESULTING FROM ITS USE. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY PROVIDES YOU WITH SPECIFIC LEGAL RIGHTS. THERE MAY BE OTHER RIGHTS YOU HAVE WHICH VARY FROM STATE TO STATE.
Written by Tim Herzog
Produced by Two Bits Worth
778 Hague Avenue
Saint Paul, MN 55104
(612) 227-2920
AOL: Hertim
Compuserve: 71223,2362
Shareware: $20.00
Make checks payable to Two Bits Worth
Background
It seems that traditionally printed letterheads are fast becoming cumbersome and too expensive. In my case, I’ve got a great-looking two-color letterhead on nice paper, and I’ve used it about six times in the past four months. Why? Everything I write these days is FAXed. There’s little point in using my expensive letterhead for faxes since the recipient can’t enjoy my wonderful two-color printing or my nice paper. And since the FAX reduces everything to about 216 DPI anyway, even my nice Linotronic output gets lost.
So my solution has been to keep my logo and letterhead in a scrapbook file. When I type a new memo, I just go to the ScrapBook, copy my letterhead, and paste it in at the top of the memo. Presto! No more wasted letterhead! But woe is me, for instead I waste precious disk space. For since I save all my correspondence on disk, and my letterhead graphic is about 45K, I instantly add 45K to each piece of correspondence. Multiply that by about 200 memos, and you’ve quickly chewed up about 1.5 Meg just to get your letterhead on the page--the same graphic over and over. There HAS to be a better way.
And now there is. LetterHeader lets you keep a collection of letterheads in the Control Panel. Then when you print a document, you get two extra popup menus in the Print Job dialog box. You can print your letterhead on the first page and/or on the rest of the pages. The popup menu lets you choose which letterhead you want to print. Then, as the document prints, LetterHeader pops your letterhead on to the hard copy. Quick, easy, simple, and fast. You’ll wonder how you did without.
Of course, LetterHeader isn’t limited to just printing letterheads. Use your favorite illustration software to create whatever you want--party invitations, wedding announcements, valentines, whatever. Then just paste them on the page when you print.
Possible Uses
You can use LetterHeader for all sorts of things, and your imagination is the limit. Some possible uses:
LetterHeads, obviously
Automatic Fax information, like a Fax PostIt note.
Placing ornaments and other decorations in the margins.
Draft copies, where the word DRAFT appears diagonally in gray under the text
Installation
Install LetterHeader by dragging it to your System Folder and restarting your machine. System 7.0+ users should put LetterHeader in the Control Panels folder in the System Folder. If you use an INIT manager such as INITPicker, you may have to inform it that there’s a new INIT out there. In any case, you did everything correctly if you see the LetterHeader logo appear on startup.
If you bypass LetterHeader (see below), or if LetterHeader couldn’t install itself (for instance, it ran out of memory or you are not running System 6.0.4 or earlier), LetterHeader displays its error icon.
Directions
Whenever you get the print dialog box (the one that comes up just before printing), LetterHeader will add some extra popup menus and graphics that let you specify a letterhead to print on your document. If you haven’t created any LetterHeads, you won’t have any to choose from, so the first thing you should do is create a letterhead or two. You do this by opening the Control Panel desk accessory and clicking on LetterHeader (scroll down to it if necessary). If you are using System 7.0+, open the Control Panels folder and double-click on LetterHeader.
The On/Off buttons control whether LetterHeader is active or not. If it is off, you get no extra options in the Print dialog box, and your letterheads won’t print. You can still use the Control Panel, though.
If Show Startup Icon is selected, the cute icon will display itself when your Macintosh starts up. If you already have too many cute icons displaying themselves, you can turn this off.
If Remember Print Settings is selected, LetterHeader will remember which letterheads you specified last time you printed and use them as defaults the next time you print. If this checkbox is not selected, LetterHeader will default to ‘None’ or no letterheads, and you must respecify a letterhead each time.
Startup bypass keys lets you hold down a key combination while your machine starts to prevent LetterHeader from installing itself. Click the checkboxes of the keys you want to hold down. If you hold down that key combination while LetterHeader tries to load itself, it will abort, and you will get the error icon shown above. If you don’t turn on any keys, you can’t bypass LetterHeader.
The About button displays the credits page.
The list below shows the letterheads you have created. A letterhead consists of the PICT file along with placement and scaling information. Click on the add button to create your first letterhead.
LetterHeader now asks you to select the PICT file that will be your letterhead. Select a PICT file to get to the letterhead designer dialog box.
You get a mockup of the page along with your letterhead in the upper-left corner. Enter a new name for your letterhead in the space provided. To move the letterhead around, click and drag it. You can also move the letterhead in tiny increments by holding down the option key and using the arrow keys. The letterhead’s placement (its top left corner) is shown in pixels in the bottom right corner of the dialog box.
You can change the PICT graphic used for your letterhead by clicking the PICT button. Clicking Print lets you print a sample of your letterhead. Page Setup lets you change the size and orientation of the page. This is just for use in this dialog box: the actual page size is set by the application's Page Setup command.
Reduce or Enlarge lets you set a reduction (numbers less than 100) or an enlargement (greater than 100) for your letterhead.
Finally, Overlay and Underlay control when the letterhead is printed: before or after the program prints each page. Underlay means that the letterhead prints ‘under’ the rest of the page, that is, the letterhead gets printed before the application gets to print. Overlay means that LetterHeader prints your letterhead after the program has finished printing the page. This is important because some programs erase parts of the page as they print, in which case, your letterhead might be 'whited out' if you don't select Overlay. On the other hand, if your letter covers a good part of the page, it might print on top of what the program prints, unless you select Underlay. Use your best judgement and some experimentation to determine which setting works best.
When your done, click OK to return to the Control Panel, or Cancel to forget your changes. You will notice that your new letterhead has been added to the list.
To edit a letterhead, double-click its name in the list or select it and click the Edit button.
To delete a letterhead, click the delete button.
To change the order of letterheads in the list, hold down the option key and drag a letterhead to a new location in the list.
Now, when you print a document, you will see some additions to your Print dialog box. Two popup menus let you specify letterheads to be added to the print job. The first menu (as indicated by the icon to the left) specifies the letterhead for the first page. The second menu (as indicated by its icon) specifies the letterhead for the second and following pages.
If you don’t want any letterhead printed on either the first or subsequent pages, just choose None from the appropriate menu. To reset both menus to None, click the word LetterHeader. To reset either menu to None, click the icon to the left of the popup menu. Clicks are faster and more convenient that dragging through menus, so that’s why these shortcuts are there.
Memory Considerations
Depending on the size of your logo, LetterHeader may run out of memory trying to print it. If this happens, it will beep to let you know that something went wrong. If you are running under System 7.0 or are running MultiFinder, you simply need to give your application more memory. To do this, select the application’s icon and choose Get Info from the File menu. Then raise the application memory size by typing a new number in the Application Memory Size text box. The amount you need to raise it depends on the size of your logo.
EPS Files
A lot of you probably wish that LetterHeader supported EPS files, since your logo was designed in Illustrator or FreeHand. Fortunately, there's a cure for that. It's called PICTuresque, and it's a DA that converts EPS graphics (as well as MacPaint files) to PICT format, leaving all your high-resolution PostScript intact. Two Bits Worth happens to make that one too. If you would like a copy, check your bulletin board service or drop me a note (and an additional check for $20.00) at the address listed above.
